But the good news is that it packs some essential features. It is more expensive than the above products. Satechi is known for its quality accessories, and the dock for the Mac Mini M1 is no different. The Mini might come off without the silicone grip or indentation if you’re not too careful. Like the one above, it’s installed under the Mac Mini. The dock works if you plan to transfer things occasionally and don’t really care about speed. That said, file transfer speeds are decent. And if you need to connect a secondary display, you should use the HDMI port on the Mac Mini. Note that it doesn’t support DisplayPort over USB Type-C. The USB 3.0 port supports transfer speeds of up to 5Gbps and can be used to connect USB Type-C peripherals. The SATA interface supports up to 5TB drives. Like the one above, the Hagibis docking station includes a 2.5-inch SATA interface, two USB 3.0 and USB 2.0 ports each, and slots for Micro SD and SD cards.

The highlight of this device is its compact shape and front-facing ports, which make it easy to connect peripherals and accessories. Due to no ARM drivers, Radeon graphics cards do not work and therefore eGPU is a no-go.The Hagibis USB Type-C docking station is another affordable dock for the Mac Mini M1 if you’re looking for some extra ports. Apple uses the same internal 150W (12V~12.5A) PSU as found in the 2018 Intel Mac mini.Īt the moment Thunderbolt devices are working well with Apple M1 Macs. It's a nice surprise to see two Intel JHL8040R controllers providing dedicated connection to two Thunderbolt 4 ports. I was most interested in identifying the Thunderbolt controller/s. On the backside of the logic board is a pair of Texas Instruments USB-C controllers. In my opinion, thermal dissipation with this new system is better. Unlike the cooling system in the Intel unit, the heatsink in this M1 Mac mini is a beefy block. The logic board is barely twice the size an iPhone 12 mini. Apple could have redesigned the M1 Mac mini to be much smaller. The antenna connector is secured in place with a T6 screw.Īnother set of four T6 screws mount the cooling fan on top logic board. The are three antennas with separate cables going to the logic board headers, one of the antennas is mounted on the bottom metal shield. Flip it upside down then pry the black plastic base cover would expose six TR6 screws. Taking this Late 2020 M1 Mac mini apart is very similar to the 2018 model. The Apple integrated graphics card cannot run more than two displays at once. This setup has been working great through RX Vega 56 Nano Gaming Box with my 2018 i5 Mac mini. I prepared my Mac mini test station with three monitors: Samsung 34-in Thunderbolt 3 ultrawide QHD, LG 27-in DisplayPort UHD, and ASUS 15-in portable USB-C FHD. All M1 Macs come with Thunderbolt 4 ports. As soon as the M1 Mac mini arrived, I tore it down to confirm a few things Apple didn't make clear.

Best thunderbolt dock for mac mini m1